LPW (Lab Pure Water System)
LPW (Lab Pure Water System)
LPW (Lab Pure Water System)
LPW (Lab Pure Water System)
LPW (Lab Pure Water System)
LPW (Lab Pure Water System)
LPW (Lab Pure Water System)
LPW (Lab Pure Water System)

LPW (Lab Pure Water System)

LPW (Lab Pure Water System):

  • The LPW is able to dispense a freely adjustable amount of water.
  • Water can be drawn in the milliliter range.
  • Product water quality ( Class 1 ASTM):
  • Conductivity 0.056 µs/cm
  • Resistivity 18.0 MΩxcm
  • Total Organic Carbon ( TOC) Max. 50 µg/L
  • The quantity can be selected via the front outlet or the external withdrawal point.
Categories: , , , , , ,

Description

LPW (Lab Pure Water System):

  • The LPW can dispense a freely adjustable amount of water.
  • Water can be drawn off down to the milliliter range.
  • Product water quality (Class 1 ASTM):
  • Conductivity 0.056 µS/cm
  • Resistivity 18.0 MΩ·cm
  • Total Organic Carbon (TOC) max. 50 µg/L
  • The amount can be selected via the front outlet or the external draw-off point.

Technical Data:

  • Ultrafiltration filter
  • UV sterilization
  • 24V diaphragm pump
  • Active digital flow transmitter
  • Active analog pressure transmitter 0-16 bar
  • IEM PLC controller
  • 7″ touchscreen on the main unit
  • 3.5″ touchscreen at the external draw-off point
  • Automatic flushing system
  • Solenoid valve on the water inlet
  • Pressure reducer
  • Operating hours counter
  • Connections:
  • all connections in 6mm
  • Power supply:
  • Voltage 230V AC 50 Hz, max. 10A
  • Dimensions and weight:
  • Width 550 x Depth 450 x Height 870 (mm)
  • Weight: approx. 20 kg

Limits:

  • Max. salinity (without upstream unit)* in feed water 5 µS/cm
  • Min. inlet pressure > 2 bar / Max. 3 bar
  • Temperature 4°C to 30°C (performance figures at 15°C)

 

  • *If pure water is not available, tap water can be used directly as feed water with the support of an additional under-counter water treatment unit.

Other Similar Products:

3-Stage 225 L/h EDI Ultrapure Water Reverse Osmosis System

3-Stage 250 L/h EDI Ultrapure Water Reverse Osmosis System

1-Stage 4000L/h Reverse Osmosis Water Treatment System

RO40 Industrial Reverse Osmosis System

 

Additional information

System Type
Gehäuseart
Housing Type

Output

Reviews

There are no reviews yet.

Be the first to review “LPW (Lab Pure Water System)”

Your email address will not be published. Required fields are marked *

Related products

  • OSL2S Ultrapure Water Reverse Osmosis System

    OSL2S Ultrapure Water Reverse Osmosis System
    Technical Data:
    • up to 3-stage reverse osmosis water treatment system
    • Output up to 60 L/h @ 10°C feed water
    • Permeate: - Conductivity of the product < 0.1 μS/cm - Silicate content < 0.1 ppm - TDS < 1 ppm
    • Dimensions approx. WxDxH 600x600x805 ( in mm )
    Type Output Liters /h Dimensions W x D x H in mm
    OSL_2S10 10 298 x 600 x 725
    OSL_2S20 20
    OSL_2S50 50
    Read more
  • LabWasserZentrale – Ultrapure Water Treatment System

    LabWasserZentrale – Ultrapure Water Treatment System
    • Ultrapure Water Treatment System - Complete Water Treatment Solution for Laboratory Facilities
    • Application area: Research / Laboratory / Medicine
    • Product water quality: 18.2 MΩ x cm Class 1 ( ASTM Standard )
    • Permeate properties:
      • - Conductivity of the product > 18.2 MΩ x cm ( 0.055 µS/cm )
      • - Silicate content < 0.1 ppm- TOC < 30 ppb
    • Dimensions:
      • Dimensions approx. WxDxH 600 x 700 x 1800 ( in mm )
    • Basic configuration:
      • Stage 1 reverse osmosis system „free-standing unit Type RO4040x“
      • Stage 2 reverse osmosis system „free-standing unit Type RO4021x“
      • Stage 3 electrodeionization ( EDI )
      • Stage 4 polishing
      • Touch screen control
    An EDI unit with matching output is used for the permanent production of ultrapure water. This technology works through electrodialysis and electrodeionization. Removing bacteria in ultrapure water applications is especially critical in medical and laboratory procedures. Ultrafiltration technology ( hollow fiber membrane ) is used to kill and remove bacterial contamination with the help of ultraviolet irradiation. When integrated into a ring main, the system can also supply the entire consumer base of a laboratory facility or other requirement and permanently prevent the growth and formation of bacteria through UV and ultrafiltration.
    Read more
  • 3-Stage 250 L/h EDI Ultrapure Water Reverse Osmosis System

    3-Stage 250 L/h EDI Ultrapure Water Reverse Osmosis System
    • Ultrapure Water Treatment System – Complete Water Treatment Solution for Laboratory Facilities
    • Application area: Research / Laboratory / Medicine
    • Product water quality: 18.2 MΩ x cm ( Class 1 ASTM Standard )
    • Permeate properties:
      • – Conductivity of the product > 18.2 MΩ x cm ( 0.055 µS/cm )
      • – Silicate content < 0.1 ppm- TOC < 30 ppb
    • Basic configuration:
      • Stage 1 reverse osmosis system „free-standing unit Type RO4040x“
      • Stage 2 reverse osmosis system „free-standing unit Type RO4021x“
      • Stage 3 electrodeionization ( EDI )
      • Stage 4 polishing
      • Touch screen control
    Read more
  • LWZ LabWasserZentrale – Ultrapure Water Treatment System

    LWZ LabWasserZentrale – Ultrapure Water Treatment System
    • LWZ Ultrapure Water Treatment System - Complete Water Treatment Solution for Laboratory Facilities
    • Application area: Research / Laboratory / Medicine
    • Product water quality: 18.2 MΩ x cm Class 1 ( ASTM Standard )
    • Permeate properties:
      • - Conductivity of the product > 18.2 MΩ x cm ( 0.055 µS/cm )
      • - Silicate content < 0.1 ppm- TOC < 30 ppb
    • Basic configuration:
      • Stage 1 reverse osmosis system „free-standing unit Type RO4040x“
      • Stage 2 reverse osmosis system „free-standing unit Type RO4021x“
      • Stage 3 electrodeionization ( EDI )
      • Stage 4 polishing
      • Touch screen control
    An EDI unit with matching output is used for the permanent production of ultrapure water. This technology works through electrodialysis and electrodeionization. Removing bacteria in ultrapure water applications is especially critical in medical and laboratory procedures. Ultrafiltration technology ( hollow fiber membrane ) is used to kill and remove bacterial contamination with the help of ultraviolet irradiation. When integrated into a ring main, the system can also supply the entire consumer base of a laboratory facility or other requirement and permanently prevent the growth and formation of bacteria through UV and ultrafiltration.
    Read more