Description
ROWZ Industrial Reverse Osmosis System – Water Treatment by Reverse Osmosis:
Technical Data:
( ROWZ industrial reverse osmosis system – water treatment by reverse osmosis )
| ROWZ Industrial Reverse Osmosis System – Water Treatment by Reverse Osmosis | |||||||||
|
Type |
ROWZ150 | ROWZ300 | ROWZ600 | ROWZ750 | ROWZ1000 | ||||
| Output Liters/h | 150 | 300 | 600 | 750 | 1000 | ||||
| Dimensions W x D mm ( H= 1355 mm) | 650×800 | 650×900 | 650×1000 | ||||||
| Bypass (automatic) | Option | ||||||||
| Conveying system | Included | ||||||||
| Mixing valve | Option | ||||||||
|
Touch Screen Display |
Included | ||||||||
| Castors | Option | ||||||||
| Shutdown system | Float switch | Included | |||||||
| Pressure switch | Option | ||||||||
| Flow switch | Option | ||||||||
| Storage tank | open | Included | |||||||
| Pressure tank | Option | ||||||||
- Output 150 to 1000 liters/hour (@15° C water temperature)
- Dimensions approx. WxDxH. (see table)
- Membrane IEM 40x XLE ( extra low energy PA membrane ) or XHR (extra high rejection)
- Membrane housing · ( stainless steel pressure vessel )
- Stainless steel centrifugal pump 230 / 400V AC, low-noise, multi-stage (see table)
- Automatic low-pressure switch ( dry-run protection )
- IEM PLC controller with remote administration option via USB or serial via internet
- Conductivity display on the permeate µS/cm
- Operating hours counter
- Aluminum or stainless steel frame
- Automatic flushing system ( solenoid valve )
- Solenoid valve on the water inlet
- 3x active digital flow transmitter ( 1: product, 1: concentrate, 1: recirculation )
- 2x active digital pressure transmitter 0-16 bar ( inlet pressure, operating pressure )
Connections:
- Permeate 3/4″ AG
- Concentrate 3/4″ AG
- Feed water 3/4″ AG ( up to RO40404)
Limits:
Max. salt content in feed water 3000 µS/cm ( design basis 750 µS/cm)
Min. inlet pressure 3 bar feed water
Temperature 4° C to 30° C
Feed water quality: 5µ filtered
Maximum free chlorine: 0.1 mg/l
without harmful minerals such as free iron.
Recovery with standard antiscalant pre-treatment up to 75%
SDI<3
Without antiscalant, the following applies: Hardness in feed water:
10° dH hardness = 50% recovery
0° dH hardness = 75% recovery
| H | Conveying system: | Included | |||||||
| H1 | Storage tank volume: | 100 liters internal (larger volume as external tank on request) |
|||||||
| H2 | Storage tank: | Product water storage tank 100 L (stainless steel storage tank) Dimensions: DiaxH:450 x 780 ( in mm) |
Product water storage tank 300 liters (PE storage tank) Dimensions: 700x800x655 WxLxH ( in mm) |
||||||
| H4 | Level measurement | Level sensor transmitter ( transducer ) Installed and programmed in the PLC controller precise level measurement via a pressure-based methodTank full ( stop production) Tank half-empty ( start production) Tank empty ( alarm ) programmed in the system’s PLCTechnical parameters: Input voltage: DC 24V DC Current draw: 200 uA Output: 1-10 V Response time: 500 ms Operating temperature: 0 ~ 45 degrees |
|||||||
| H5 | Pump: | Booster pump with frequency inverter: Type: stainless steel centrifugal pump station Stainless steel centrifugal pump 230V 50 Hz, low-noise, multi-stage, 650W Mounted on aluminum frame ( WZ unit) controlled by the conveying system’s own control unit Multi-stage centrifugal pump Constant operating pressure 3 m³/h @ 3.5 bar ( adjustable)Induction motor 230V, 50 Hz 0-10 bar pressure transmitter for shutdown in the permeate tank, programmed and installedMounted on aluminum frame controlled by the reverse osmosis system’s own PLC control |
|||||||
List of Related Products:
LabWasserZentrale Ultrapure Water Treatment System
Reviews
There are no reviews yet.